箱式電阻爐中英文版說明書
中文版
用途概述
本系列電阻系周期作業式，供實驗室、工礦企業、科研單位作元素分析測定和一般小型鋼件淬火、退火、回火等熱處理時加熱用，高溫爐還可作金屬、陶瓷的燒結、溶解、分析等高溫加熱用。
產品特點
1.本系列電阻爐外殼采用上等冷軋鋼板制作，表面噴涂工藝處理、爐門采用側開式結構、啟閉靈活。
2.中溫箱式采用封閉型爐膛，以電熱合金絲為發熱元件制成螺旋形后盤繞于爐膛四壁之中，散熱時爐溫均勻，延長了使用壽命。
3.高溫管式電阻爐采用耐高溫燃燒管，以硅碳棒作為發熱元件在爐膛外套內安裝。
4.高溫箱式電阻爐以硅碳棒為發熱元件直接在爐膛內安裝，熱利用率高。
5.本系列電阻爐保溫材料選用0.4-0.6輕質泡沫保溫磚以及硅酸鋁纖維棉，使其蓄熱量和導熱系數減少，致使爐膛蓄熱量大，升溫時間縮短、表面溫升低、耗電量也大大降低。
技術參數
型號：SX-10-12
額定功率：10kw
額定溫度：1200℃
額定電壓：380V
工作電壓：380V
空爐升溫時間：≤120分鐘
工作室尺寸：400*250*160
產品外形尺寸：910*600*635
包裝外形尺寸：1120*770*740
凈重：203kg
毛重：230kg
性能測試在空載條件下為：環境溫度為20℃，環境濕度為50%RH
英文版
USES
This kind of periodical furna is used by labs, industry, and scientific for research element analysis, as well as for heating of small size iron works quenching, annealing and tempering; other applications include iron heating and ramic sintering, dissolving, and analyzing.
Characteristics：
1.Cold rolling steel spraying exterior; open-side door enables easy on/off.
2.Medium-temperature furna adopts enclosed fire pot; uniform heating and long servi life are provided by spiral electrothermal alloy wire elements that embedded in all four inwall of chamber.
3.High-temperature tubular resistan furna adopts heat resistant combustion tube and takes elema as heating component to fix on outer sleeve of fire pot.
4.High-temperature box resistan furna takes elema as heating component fixing in the fire pot to ensure high heat use ratio.
5.light-weight spumy insulating brick of 0.4~0.6 and aluminosilicate fiber cotton are used as thermal insulation material to ensure good heat insulation, to promote heat storage capacity, to shorten heating up time, and to redu power loss and power consumption.
Main Technical Parameters：
Model: SX-10-12
Rated power:10KW
Rated tem:1200℃
Rated voltage:380V
Working voltageV
Warm-up time:120(min)
Interior dimensions:W ×D× H(mm) :400*250*160
Exterior dimensionsW ×D× H(mm):910*600*635
Packaging dimensionsW ×D× H(mm):1120*770*740
Gross weight (kg) Net:203KG
weight (kg ):230
箱式電阻爐中英文版說明書
